Instrukcja First Austria FA-5096-4 Płyta do zabudowy

Instrukcja

32

INSTRUCTION MANUAL

Read this booklet thoroughly before using and

save it for future reference



The safety of electrical appliances from FIRST

Austria complies with the recognized technical

directives and legal regulations for safety.

Nevertheless, you and the other users of the

appliance should observe the following:

• Please read these instructions carefully

before using this appliance for the rst time

and keep them for further reference.

• Only connect appliance to alternate current

power supply with voltage as specied on

nameplate (grounding outlet).

• For use place the appliance on a clear, at

and heat-resistant surface. Distance from

the wall should be at least 5cm. The area

above the appliance should be kept free to

allow an unobstructed air-circulation. Never

place the appliance or supply cable on

hot surfaces. Nor should the appliance be

placed or operated in the vicinity of exposed

gas ames.

• Make sure that there is no contact between

the supply cable and hot parts of the

appliance.

• The appliance becomes hot during

operation. Therefore be careful not to touch

any of the hot parts.

• Over-heated fats and oils can ignite. Food

prepared with oils and fats (e. g. french fries)

should therefore always be prepared under

supervision.

• As long as the appliance is hot – even when

not connected to the mains – it should be

under supervision. Nor should it be under

supervision. Nor should it be transported

with a saucepan on the hot-plate – danger of

burning oneself. Allow the appliance to cool

down fully before cleaning and storing away.

• The plaug should be pulled: after use, before

cleaning and in the event of malfunctioning.

• Never dip the appliance into water. Also

protect cable against moisture.

• Children do not realize the dangers which

can arise when working with electrical

appliances. Therefore they should only be

allowed to use electrical appliances only

under supervision. Special care should be

taken in the presence of children.

• Do not pull at the mains cable for

disconnecting appliance from the mains

supply.

• If the appliance or the mains cable show

any visible signs of damage they should

be examined by trained personnel or by

customer service as special equipment is

required in this case.

• We are excluded of liability for all damages

that may arise if the device is used for

purposes other than originally intended or if

it is used inappropriately.

• Don’t lay paper and cloth etc. on the surface

plate for indirect heating for fear of ring

caused by the overheat pan bottom.

• Don’t collide with the nucleated glass plate.

In case of breaking, turn off the oven and

pull out the plus to cut off the power and

stop operation.

• Don’t put credit card, IC, watch and radio

set etc close to the oven for fear that the

magnetic eld would impact them to cause

cacophony.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

SELECTION AND USE OF OVEN TOOLS

1. Suitable oven tools and containers: iron

series (enameled, cast and stainless irons)

with plain and smooth bottoms with diameter

of 12-26cm.

2. Unsuitable oven tools and containers:

A. Containers with bottom diameter less than

12cm.

B. Containers and pans with uneven bottoms.

HOW TO CLEAN

1) Disconnect the induction cooker and wait

until it has cooled down completely. Clean

after use.

2) If the pots/pans are used without being

cleaned, discoloration or burn stains may

result.

3) Do not use benzene, thinner, scrubbing

brushes or polishing powder to clean the

induction cooker.

4) Wipe clean using detergent and a damp

cloth.

5) Use a vacuum cleaner to remove dirt from

the air intake and exhaust vent.

ENGLISH

ENGLISH

6) Never pour water over the cooker (if

water gets inside the cooker it will cause

malfunction).

PARTS (Fig. A)

1. Glass plate

2. Exhaust Vent

3. Power cord

4. Hot Icon

5. Timer Icon

6. Up/Down Adjustment

7. LED display

8. On/Off Icon

9. Lock icon

PROTECTION

1. Over-heat protection: If the temperature

of panel over 650°C or inside of units over

100°C, the units will stop automatically.

2. Inner temperature overheat protection:

When the inner temperature reached 100°C,

it will automatically stop.

3. Lowest voltage and over-voltage protection:

If the voltage below 140V or over 260V, the

units will stop working automatically.

4. Constant power protection: When the

supply voltage rises, the output current will

be automatic decreased, the maximum

power increase of no more than 50W. And

when the power supply voltage drops, the

maximum power changes with the voltage

drop down.

OPERATION

1. ON/OFF:

After inserting the plug into the socket, a “Beep”

will emit and the indicator above the [On/Off]

key will start to ash, indicating the appliance

in connection with a power source, known as

standby mode. The display shows [----] when

[On/Off] key is pressed once, the appliance

goes to selection mode and the indicator

above [On/Off] remains light up. Press the

corresponding function keys to start operation.

Stop the operation and switch to standby mode

by pressing [On/Off] key after cooking.

2. COOKING MODE:

Press [+] or [-] key under standby mode, the

display shows [8] representing that the default

power level is 8. User can press [+] or [-] to set

the desired power level from 1 to 10. To cancel

this mode, press other function keys to or [On/

Off] key to stop the operation.

3. TIMER FUNCTION:

Press [Timer] and the indicator of Timer lights

up, display will show [30]. User can press [+] or

[-] to set for the desired time. The time can be

adjusted from 0 minute to 120 minutes. After

setting, user can press [Timer] key once to

conrm or wait until the display stop ashing.

After the “Beep” signal, the appliance will stop

the operation and change to standby mode

automatically when the end of the countdown.

To cancel this function, user can either press

the [On/Off] key to return to standby mode or

hold the [Timer] key to resume the desired

power or temperature operation.

4. LOCK FUNCTION:

Short press the “lock icon” to lock functionality

off all buttons. Press the lock icon for about 3

seconds to unlock again.

MAINTENANCE:

Clean only with a dry cloth. Do not use cleaning

solvents or abrasives.

Correct Disposal of this product

This marking indicates that this product

should not be disposed with other

household wastes throughout the EU. To

prevent possible harm to the environment

or human health from uncontrolled waste

disposal, recycle it responsibly to promote the

sustainable reuse of material resources. To

return your used device, please use the return

and collection systems or contact the retailer

where the product was purchased. They can

take this product for environmental safe

recycling.

TECHNICAL SPECIFICATIONS

220-240V • 50/60Hz • 2000W

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi First Austria FA-5096-4 Płyta do zabudowy. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z First Austria. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego First Austria FA-5096-4 Płyta do zabudowy w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla First Austria Płyty do zabudowy
Więcej podręczników Płyty do zabudowy

Często zadawane pytania dotyczące First Austria FA-5096-4 Płyta do zabudowy

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.