Instrukcja Vitamix A3500i Ascent Blender

Instrukcja

6

care and cleaning

Care and Cleaning of Large Containers:

To Clean:

1. Fill the container half full with warm water and add a couple of drops of washing-up

liquid.

2. Snap or push the complete 2-Part lid into the locked position.

3. Perform one of the following procedures:

• Variable Speed:

a. Press Start/Stop.

b. Slowly increase the variable speed to 10.

c. Run the machine for 30 to 60 seconds.

d. Rotate the Variable-Speed dial back to Variable 1.

• Model A3500i, press the Self-Cleaning Icon ( ) to select. Press Start/Stop.

The programme will automatically stop when complete.

4. Rinse and drain all pieces.

In-Place Cleaning: (0.6-litre cup or 240-ml bowl)

1. Fill the container half full with water and add a couple of drops of washing-up liquid.

DO NOT BLEND HOT WATER.

2. Put a seal on the bottom thread of the blade base. The seal should fit snugly and evenly

around the thread. Thread the blade base onto the cup in a clockwise direction just

untiltight.

3. Put the cup and blade base onto the base.

4. Press Start/Stop. Slowly increase the variable speed to 10.

5. Run the machine for 30 to 60 seconds.

6. Rotate the Variable-Speed dial back to Variable 1. Press Start/Stop.

7. Rinse and drain all pieces.

To Sanitise: (Bleach) (0.6-litre cup or 240-ml bowl)

1. Follow the cleaning instructions above.

2. Fill the container half full with water and 1/2 teaspoon of liquid bleach.

DO NOT BLEND HOT WATER.

3. Put a seal on the bottom thread of the blade base. The seal should fit snugly and evenly

around the thread. Thread the blade base onto the cup in a clockwise direction until just tight.

4. Put the cup and blade base onto the base.

5. Press Start/Stop.

6. Slowly increase the variable speed to 10.

7. Run the machine for 30 to 60 seconds.

8. Rotate the Variable-Speed dial back to Variable 1. Press Start / Stop.

9. Allow the mixture to stand in the container for an additional 1 ½ minutes.

10. Pour out the bleach mixture. Allow the container to air dry. Do not rinse after sanitising.

Lids, Lid Plug, Centring Pad and Tamper

The parts are dishwasher safe. If preferred, wash the parts in warm soapy water.

Rinseclean under running water, then dry.

WARNING

Electrical Shock Hazard.

Always unplug before cleaning the blender base or when not in use.

Do not put the blender base in water or otherliquids.

Failure to follow instructions can cause death or electric shock.

WARNING

To Avoid Injury and Damage.

To avoid inadvertent activation, turn o and unplug the blender before cleaning.

To Sanitise: (Bleach) (Full-size Containers)

1. Follow the cleaning instructions above.

2. Fill the container half full of water and add 1 ½ teaspoons of liquid bleach.

3. Snap or push the complete 2-part lid into the locked position.

4. Perform one of the following procedures:

• Variable Speed:

a. Press Start/Stop.

b. Slowly increase the variable speed to 10.

c. Run the machine for 30 to 60 seconds.

d. Rotate the Variable-Speed dial back to Variable 1.

• Model A3500i, press the Self-Cleaning Icon ( ) to select. Press Start/Stop.

The programme will automatically stop when complete.

5. Allow the mixture to stand in the container for an additional 1 ½ minutes.

6. Pour out the bleach mixture. Allow the container to air dry. Do not rinse after sanitising.

BEFORE FIRST USE:

1. Wipe the base with a warm damp cloth and wipe clean with a dry, soft cloth. Wash

the container, cups, lids, lid plug and tamper with warm, soapy water. Rinse all parts.

Wipe dry with a dry, soft cloth.

2. Choose a space on the counter that is level, dry and clean. Plug the blender into an

earthed, 3-prong outlet.

Note: Your Vitamix container is designed to be completely cleanable without removing

the retainer nut and blade assembly. DO NOT attempt to remove the retainer nut or

blade assembly from the container. Our Normal Cleaning and Sanitising procedures

or a dishwasher cleaning cycle will ensure a complete and thorough cleaning of

your container and its components. If your container is damaged, please do not use.

ContactVitamix Customer Service IMMEDIATELY.

To Sanitise: (Vinegar) (Full-size Containers)

1. Follow the cleaning instructions above.

2. Prepare the vinegar solution: for the 2-litre container, dilute 475 ml of vinegar in

475ml water.

3. Snap or push the complete 2-part lid into the locked position.

4. Perform one of the following procedures:

• Variable Speed:

a. Press Start/Stop.

b. Slowly increase the variable speed to 10.

c. Run the machine on variable-speed 10 for 2 full minutes.

d. Rotate the Variable-Speed dial back to Variable 1. Press Start/Stop.

5. Allow the mixture to stand in the container for an additional 3 full minutes. The total

contact time of the vinegar solution in the container should equal 5 minutes.

6. Pour the vinegar solution out of the container over the inside surface of the 2-part

lid. Repeat the sanitisation procedure again.

7. Allow the container and lid to air dry. Do not rinse after sanitising. If necessary, rinse

immediately before next use.

Blender Base

1. Turn o and unplug the blender.

2. Wash the outside surface with a damp, soft cloth or sponge that has been rinsed in a mild

solution of washing-up liquid and warm water. Do not place the blender base in water.

The centring pad can be removed for more thorough cleaning.

3. Immediately dry all surfaces and polish with a soft cloth.

To Sanitise (0.6-litre cup or 240-ml bowl) with Vinegar (minimum 5% acidity):

Note: If the vinegar has greater acidity, the water can be increased to get a minimum

2.5%solution.

For example, for 10% acidity use 1 part vinegar and 3 parts water.

1. Follow the cleaning instructions above.

2. Fill the container 150 ml with water and 150 ml white vinegar (60 ml with water and 60 ml

white vinegar). DO NOT BLEND HOT WATER.

3. Put a seal on the bottom thread of the blade base. The seal should fit snugly and evenly

around the thread. Thread the blade base onto the cup in a clockwise direction until just

tight. Put the cup and blade base onto the base.

4. Use Variable Speed:

a. Press Start/Stop.

b. Slowly increase the variable speed to 10.

c. Run the machine for 60 seconds.

d. Rotate the Variable-Speed dial back to Variable 1. Press Start/Stop.

5. Allow the mixture to stand in the container for an additional 4 minutes (5 minutes total

contact time).

6. Pour the vinegar mixture out. Allow the container to air dry. Do not rinse after sanitising.

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Vitamix A3500i Ascent Blender. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Vitamix. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Vitamix A3500i Ascent Blender w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Vitamix Blendery
Więcej podręczników Blendery

Często zadawane pytania dotyczące Vitamix A3500i Ascent Blender

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

Vitamix A3300i Ascent Blender

Instrukcja

Vitamix E310 Explorian Blender

Instrukcja

Eta Activmix Premium 2103 90000 Blender

Instrukcja

Taurus Magnum Press 1500 Blender

Instrukcja

Braun JB 1000 WH PowerBlend 1 Blender

Instrukcja

Westinghouse WKBE221BK Blender

Instrukcja

Gorenje BP1500DE Blender

Instrukcja

Braun JB 1051 BK PowerBlend 1 Blender

Powiązane kategorie