Home > Różny > Golarki do tkanin > Teesa Golarki do tkanin > Teesa TSA0034 Golarka do tkanin

Instrukcja Teesa TSA0034 Golarka do tkanin

Potrzebujesz instrukcji dla swojego Teesa TSA0034 Golarka do tkanin? Poniżej możesz bezpłatnie obejrzeć i pobrać instrukcję w formacie PDF w języku polskim. Ten produkt ma obecnie zadane 0 pytania, 0 komentarzy i 0 głosów. Jeśli nie jest to podręcznik, którego szukasz, skontaktuj się z nami.

Czy Twój produkt nie działa, a w instrukcji obsługi brakuje rozwiązania Twojego problemu? Udaj się do Repair Café, gdzie naprawisz swój sprzęt za darmo.

Instrukcja

SAFETY INSTRUCTIONS

Read the entire instruction manual before you start installation and

assembly and keep it for future reference.

1. Protect this device from water, humidity and other liquids. Avoid

using/storing it in extreme temperatures. Do not expose it to direct

sunlight and other sources of heat.

2. Protect this device from shock and being dropped.

3. Do not use the product for purposes dierent from displayed in this

operating manual.

4. Appliance for household use only.

5. Do not apply too much pressure on the device. Applying too much

pressure on the device will cause the rotating blade to stop. Reducing

pressure releases the blade.

6. Do not use the device on clothes you are wearing.

7. Do not use the device on damp clothes.

8. Exercise special caution when using the device near buttons, stitching,

zips, patches etc.

9. Keep the device out of the reach of children.

10. Use only specied batteries.

11. Use only authorized accessories.

12. Do not place the appliance in water or any liquid; nor handle/use it

with wet or moist hands.

13. Do not use this device if it has been damaged and malfunctions.

14. Do not attempt to repair this appliance yourself. In case of damage,

contact authorized service point for check-up or repair. Never

disassemble this device.

15. Clean and store this device in accordance to the instructions listed in

“Cleaning and storage” section.

PRODUCT DESCRIPTION

BATTERY INSTALLATION

1. Slide out the battery compartment cover.

2. Insert 2x AA battery with correct polarization.

3. Slide in the battery compartment cover.

Notes:

• Use only specied batteries.

• Do not mix batteries of dierent type.

• Replace all batteries at the same time.

• Store the device without the batteries inside if it is not going to be

used for more than 3 months.

OPERATION

Notes:

• Before rst use make sure that all parts of the device have been

properly installed and the u compartment is empty.

• You can use the device without the spacer on.

• This lint remover can damage very soft materials. Therefore always test

the lint remover on an inconspicuous part of the garment.

• The device will not operate if the blade guard is not installed.

1. Lay the garment on a at surface such as an ironing board. Ensure that the

surface to be processed has no wrinkles. Otherwise, the garment could

be damaged.

1. Set the cutting distance by rotating the spacer left or right or take the

spacer o.

• Upper position (large distance to the blade guard) for large bobbles and

coarse textiles.

• Lower position (small distance to the blade guard) for small lint and ne

textiles.

• Remove the spacer only for very ne lint (no spacing to the blade

guard).

3. Turn on the device by pressing the ON/OFF button.

4. Run the device lightly and without too much pressure over the material.

5. Turn o the device by pressing the ON/OFF button.

6. Slide out the u compartment. Throw away u that have been collected

inside the u compartment. Replace the u compartment and push it

onto the device until it locks in place (you will hear an audible click).

CLEANING AND STORAGE

• Do not place the appliance in water or any liquid.

• Do not use any chemical agents to clean this device.

• Clean this device with a soft, slightly damp cloth.

• Do not let the u compartment being overlled. If the u

compartment is overlled, the blade will work slowly even though

the batteries are still working. Regularly empty the u compartment.

Note: Blade is very sharp and can easily be damaged. Exercise special caution

when cleaning.

1. Make sure the device is switched o.

2. If used, remove the adjustable spacer, unscrew the blade guard and

remove the blade. Clean the blade and blade guard with the included

cleaning brush.

3. After cleaning, put the blade on the spindle and tighten the blade

guard.

• Before storing, make sure the device is clean and dry.

• Store the device in a dry, cool place out of the reach of children.

English

Correct Disposal of This Product

(Waste Electrical & Electronic

Equipment)

(Applicable in the European Union and other European countries with

separate collection systems) This marking shown on the product or its

literature, indicates that it should not be disposed with other household

wastes at the end of its working life. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, please

separate this from other types of wastes and recycle it responsibly to

promote the sustainable reuse of material resources. Household users should

contact either the retailer where they purchased this product, or their local

government oce, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their supplier

and check the terms and conditions of the purchase contract. This product

should not be mixed with other commercial wastes for disposal.

Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k.,

ul. Garwolińska 1, 08-400 Miętne.

①

②

③

④

⑤

⑥

1. Adjustable spacer

2. Blade guard

3. Flu compartment

4. Battery compartment cover

5. ON/OFF button

6. Cleaning brush

MOUNTING THE ADJUSTABLE SPACER

1. Place the spacer on the cutting head so that the notches on the spacer

t into the projections on the cutting head and press it rmly.

2. Pull the spacer o the cutting head to remove it from the device.

Ocena

Podziel się z nami swoją opinią na temat Teesa TSA0034 Golarka do tkanin i oceń urządzenie. Chcesz podzielić się swoimi doświadczeniami z tym produktem lub zadać pytanie? Zostaw komentarz na dole strony.

Czy jesteś zadowolony z Teesa TSA0034 Golarka do tkanin?
Tak Nie

Zostań pierwszą osobą, która oceni ten produkt

0 głosów

Dołącz do dyskusji na temat tego produktu

Tutaj możesz podzielić się swoją opinią na temat Teesa TSA0034 Golarka do tkanin. Jeśli masz pytanie, najpierw dokładnie przeczytaj instrukcję. Zapytanie o instrukcję można złożyć za pomocą naszego formularza kontaktowego.

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Teesa TSA0034 Golarka do tkanin. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Teesa. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Teesa TSA0034 Golarka do tkanin w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.