Instrukcja Sharp SJ-MB300S Lodówko-zamrażarka

Instrukcja

2

Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation

manual to ensure that you gain the maximum benefit from it.

● This refrigerator contains flammable refrigerant (R600a:

isobutane) and insulation blowing gas (cyclopentane).

Observe the following rules to prevent ignition and

explosion.

• The refrigeration system behind and inside the

refrigerator contains refrigerant. Do not allow any

sharp objects to come into contact with the

refrigeration system.

• Do not use mechanical devices or other means to

accelerate the defrosting process. (This refrigerator

has adopted automatic defrosting system.)

• Do not use electric appliances inside the refrigerator.

• Use only the specified parts for the refrigerator

compartment light.

• Do not block the openings on the circumference of the

refrigerator.

• If the refrigeration system should get punctured, do not

touch the wall outlet and do not use open flames. Open

the window and air out the room. Then ask a service

agent approved by SHARP for servicing.

• This refrigerator should be disposed appropriately.

Take the refrigerator to a recycling plant for flammable

refrigerant and insulation blowing gases.

● Highly volatile and flammable materials such as ether,

petrol, propane gas, adhesive agents and pure alcohol

etc. are liable to explode. Do not store these materials in

the refrigerator.

● Dust deposited on the power plug may cause fire. Wipe

it off carefully.

● Do not attempt to change or modify this refrigerator. This

may result in fire, electric shock or injury.

● Ensure that the refrigerator presents no danger to

children while being stored for disposal. (e.g. remove the

magnetic door seals to prevent child entrapment.)

● Do not touch foods or metal containers in the freezer

compartment with your wet hands. This may cause

frostbite.

● Do not use an extension cord or adapter plug.

● Do not place bottled and canned drinks in the freezer as

they may crack when frozen.

● Make sure that the power cord has not been damaged

during installation or moving. If the power plug or cord is

loose, do not insert the power plug. There is a risk of

electric shock or fire.

● Disconnect from the mains electricity supply by

removing the mains plug from the electricity supply

socket. Do not remove by pulling the mains lead. This

may cause electric shock or fire.

● Should the flexible supply cord be damaged, it must be

replaced by service agent approved by SHARP as a

special cord is required.

● In case of gas leak, ventilate the area by opening a

window, etc. Do not touch the refrigerator or the power

outlet.

● Do not place objects containing liquid or unsteady

objects on top of refrigerator.

● This refrigerator is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the refrigerator by a person

responsible for their safety. Young children should be

supervised to ensure that they do not play with the

refrigerator.

1

Keep adequate ventilation space around the refrigerator.

•

The figure shows the minimum required space for installing the refrigerator.

It differs from the space in the measurement condition of the amount of power

consumption.

•

It is possible to use the refrigerator with a less amount of power consumption by

keeping greater space.

•

If using the refrigerator in the space below dimension of the figure, it may cause

the temperatures in the unit to rise, loud noise, and failure.

2

Using the two front adjustable feet, ensure that the refrigerator is positioned

firmly and level on the floor.

3

Remove the 2 screws of the cabinet lower part, and use these to fit the foot

cover. (supplied inside the refrigerator compartment)

WARNING

Do not install the refrigerator in a damp or wet location as this may cause damage to

the insulation and a leak. Condensation may also build on the outer cabinet and

cause rust.

NOTE

• Position your refrigerator so that the plug is accessible.

• Keep your refrigerator out of direct sunlight.

• Do not place next to heat generating appliance.

• Do not place directly on the ground. Provide suitable stand.

• To insert the power plug when the door is opened, door alarm sounds but it is not

abnormal. This sound stops when closing the door.

When transporting

• Using the casters, it is possible to move back and forth.

Impossible movement and movement in a transverse

direction damage a floor.

• Carry the refrigerator by holding the handles located on

the rear and the adjustable feet at the bottom.

Before using your refrigerator

Clean the inside parts with a cloth soaked in warm water.

If soapy water is used, wipe it off thoroughly with water.

WARNING

CAUTION

INSTALLATION

1

2

3

1110 mm

1270 mm

Adjustable

foot

Screws

Foot cover

60mm

or more

60mm

or more

90mm or more

Casters

rear

bottom

(A934)02-09_Eng.fm Page 2 Wednesday, February 18, 2009 1:13 PM

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Sharp SJ-MB300S Lodówko-zamrażarka. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Sharp. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Sharp SJ-MB300S Lodówko-zamrażarka w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Sharp Lodówko-zamrażarki
Więcej podręczników Lodówko-zamrażarki

Często zadawane pytania dotyczące Sharp SJ-MB300S Lodówko-zamrażarka

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.