Instrukcja Parkside PHKSA 18-Li A1 Pilarka tarczowa

Instrukcja

6

PHKSA 18-Li A1

GB

a) Maintain a fi rm grip with both hands on the

saw and position your arms to resist kickback

forces. Position your body to either side of the

blade, but not in line with the blade. Kickback

could cause the saw to jump backwards, but kick-

back forces can be controlled by the operator, if

proper precautions are taken.

b) When blade is binding, or when interrupting

a cut for any reason, release the trigger and

hold the saw motionless in the material until

the blade comes to a complete stop. Never

attempt to remove the saw from the work or

pull the saw backwards while the blade is in

motion or kickback may occur. Investigate and

take corrective actions to eliminate the cause of

blade binding.

c) When restarting a saw in the workpiece, centre

the saw blade in the kerf and check that saw

teeth are not engaged into the material. If saw

blade is binding, it may walk up or kickback from

the workpiece as the saw is restarted.

d) Support large panels to minimise the risk of

blade pinching and kickback. Large panels tend

to sag under their own weight. Supports must be

placed under the panel on both sides, near the

line of cut and near the edge of the panel.

e) Do not use dull or damaged blades.

Unsharpened or improperly set blades produce

narrow kerf causing excessive friction, blade

binding and kickback.

f) Blade depth and bevel adjusting locking levers

must be tight and secure before making cut.

If blade adjustment shifts while cutting, it may

cause binding and kickback.

g) Use extra caution when sawing into existing

walls or other blind areas. The protruding blade

may cut objects that can cause kickback.

Lower guard function

a) Check lower guard for proper closing before

each use. Do not operate the saw if lower

guard does not move freely and close instantly.

Never clamp or tie the lower guard into the

open position. If saw is accidentally dropped,

lower guard may be bent. Raise the lower guard

with the retracting handle and make sure it moves

freely and does not touch the blade or any

other part, in all angles and depths of cut.

b) Check the operation of the lower guard spring.

If the guard and the spring are not operating

properly, they must be serviced before use. Lower

guard may operate sluggishly due to damaged

parts, gummy deposits, or a build-up of debris.

c) Lower guard may be retracted manually only

for special cuts such as “plunge cuts” and

“compound cuts”. Raise lower guard by retracting

handle and as soon as blade enters the material,

the lower guard must be released. For all other saw-

ing, the lower guard should operate automatically.

d) Always observe that the lower guard is cover-

ing the blade before placing saw down on

bench or fl oor. An unprotected, coasting blade

will cause the saw to walk backwards, cutting

whatever is in its path. Be aware of the time it

takes for the blade to stop after switch is released.

Safety guidelines for battery chargers

■ This appliance may be used by children aged

8 years and above and by persons with limited

physical, sensory or mental capabilities or lack of

experience and knowledge, provided that they are

under supervision or have been told how to use the

appliance safely and are aware of the potential risks.

Children must not use the appliance as a plaything.

Cleaning and user maintenance tasks may not be

carried out by children unless they are supervised.

This charger is suitable for indoor use only.

WARNING!

■ Do not operate the appliance with a dam-

aged cable, supply cord or mains plug. A

damaged power cord causes danger to life

by electric shock.

Supplementary notes

■ Do not use any grinding discs.

■ Use only saw blades with diameters corre-

sponding to the label on the saw.

■ When sawing wood or other materials which may

create dusts that are hazardous to health, always

connect a suitable, certifi ed vacuum extractor device.

■ Wear a dust mask when sawing wood.

■ Use only the recommended saw blades.

■ Always wear ear protectors.

IB_102867_PHKSA18-LiA1_LB4.indb 6 13.10.14 11:07

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Parkside PHKSA 18-Li A1 Pilarka tarczowa. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Parkside. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Parkside PHKSA 18-Li A1 Pilarka tarczowa w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Parkside Pilarki tarczowe
Więcej podręczników Pilarki tarczowe

Często zadawane pytania dotyczące Parkside PHKSA 18-Li A1 Pilarka tarczowa

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

Parkside IAN 273331 Pilarka tarczowa

Instrukcja

Parkside IAN 373436 Pilarka tarczowa

Instrukcja

Parkside IAN 353555 Pilarka tarczowa

Instrukcja

Parkside IAN 339963 Pilarka tarczowa

Instrukcja

Parkside IAN 302114 Pilarka tarczowa

Instrukcja

Parkside IAN 67034 Pilarka tarczowa

Instrukcja

Parkside IAN 326400 Pilarka tarczowa

Instrukcja

Parkside IAN 291870 Pilarka tarczowa

Powiązane kategorie