Instrukcja Makita GB801 Szlifierka stołowa

Instrukcja

3

■ WEAR APPROPRIATE CLOTHING. Do not wear loose

clothing, neckties, or jewelry that can get caught in the

tool’s moving parts and cause personal injury, Non-

solid footwear is recommended when working

outdoors. Wear protective hair covering to contain long

hair.

■ ALWAYS WEAR SAFETY GLASSES WITH SIDE

SHIELDS. Everyday eyeglasses are NOT safety

glasses.

■ PROTECT YOUR LUNGS. Wear a face or dust mask if

the cutting operation is dusty.

■ PROTECT YOUR HEARING. Wear hearing protection

during extended periods of operation.

■ DON’T ABUSE CORD. Never carry tool by the cord or

yank it to disconnect from receptacle. Keep cord away

from heat, oil, and sharp edges.

■ DO NOT OVERREACH. Keep proper footing and

balance at all times.

■ MAINTAIN TOOLS WITH CARE. Keep tools sharp and

clean for best and safest performance. Follow

instructions for lubricating and changing accessories.

■ NEVER LEAVE TOOL RUNNING UNATTENDED.

TURN POWER OFF. Disconnect all tools when not in

use, before servicing, or when changing attachments,

wheels, etc.

■ AVOID ACCIDENTAL STARTING.

■ USE RECOMMENDED ACCESSORIES. The use of

improper accessories may cause risk of injury.

■ DO NOT use wheels with incorrect size bore. NEVER

use wheel washers or wheel that are defective or

incorrect and NEVER touch grinding wheel or other

moving parts.

■ NEVER STAND ON TOOL. Serious injury could occur

if the tool is tipped or if the wheel is unintentionally

contacted.

■ DIRECTION OF FEED. Be aware of wheel rotation

direction; never grind without the work rest being

properly set. NEVER grind more than one workpiece at

a time.

WARNING

Wheel coasts after turn off.

■ CHECK DAMAGED PARTS. Before further use of the

tool, a guard or other part that is damaged should be

carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting and any other conditions

that may affect its operation. A guard or other part that

is damage must be properly repaired or replaced by an

authorized service center to avoid risk of personal

injury.

■ KEEP TOOL DRY, CLEAN, AND FREE FROM OIL

AND GREASE. Always use a clean cloth when

cleaning. Never use brake fluids, gasoline, petroleum-

based products, or any solvents to clean tool.

■ INSPECT POWER SUPPLY AND EXTENSION

CORDS periodically and, if damaged, have repaired by

a qualified service technician. Stay constantly aware of

cord location and keep it well away from the rotating

wheel.

■ NEVER USE IN AN EXPLOSIVE ATMOSPHERE.

Normal sparking of the motor or sparking from grinding

metal could ignite fumes.

■ USE OUTDOOR EXTENSION CORDS. Use only

extension cords with approved ground connection that

are intended for use outdoors and so marked.

■ NEVER reach to pick up a workpiece, a piece of scrap,

or anything else that is in or near the grinding path of

the wheel.

■ AVOID AWKWARD OPERATIONS AND HAND

POSITIONS where a sudden slip could cause your

hand to move into the wheel. ALWAYS make sure you

have good balance.

■ NEVER stand or have any part of your body in line with

the path of the wheel.

■ DO NOT USE TOOL IF SWITCH DOES NOT TURN IT

ON AND OFF. Have defective switches replaced by an

authorized service center.

■ DO NOT TURN THE MOTOR SWITCH ON AND OFF

RAPIDLY. This could cause the wheel to loosen and

could create a hazard. Should this ever occur, stand

clear and allow the wheel to come to a complete stop.

Disconnect your grinder from the power supply and

securely retighten the wheel nut.

WARNING:

When servicing use only identical replacement parts. Use

of any other parts may create a hazard or cause product

damage.

■ USE ONLY FLANGES supplied with this bench

grinder.

IF ANY PART OF THIS GRINDER IS MISSING or

should break, bend, or fail in any way, or should any

electrical component fail to perform properly, shut off

the power switch, remove the machine plug from the

power source and have damaged, missing, or failed

parts replaced before resuming operation.

■ MAKE SURE THE GRINDING WHEEL IS SECURELY

MOUNTED as described in the operating instructions

before connecting the tool to a power supply.

■ DO NOT OVERTIGHTEN THE WHEEL NUT,

excessive tightening can cause the wheel to crack

during operation.

■ INSPECT GRINDING WHEEL for visible defects.

Check the wheel for fissures and cracks, and test for

normal operation prior to use.

■ ADJUST distance between wheel and work rest to

maintain 1.6 mm. or less separation as the diameter of

the wheel decreases with use. The value of separation

used in the marking is to be the separation

recommended by the manufacturer but shall not be

more than 3.2 mm.

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Makita GB801 Szlifierka stołowa. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Makita. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Makita GB801 Szlifierka stołowa w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Makita Szlifierki stołowe
Więcej podręczników Szlifierki stołowe

Często zadawane pytania dotyczące Makita GB801 Szlifierka stołowa

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

Makita GB602W Szlifierka stołowa

Instrukcja

Makita GB602 Szlifierka stołowa

Instrukcja

Parkside IAN 270703 Szlifierka stołowa

Instrukcja

Einhell TC-XG 75 Kit Szlifierka stołowa

Instrukcja

Scheppach HG34 Szlifierka stołowa

Instrukcja

Scheppach BG 200 Szlifierka stołowa

Instrukcja

Far Tools BG 200B Szlifierka stołowa

Instrukcja

Far Tools BGN 150C Szlifierka stołowa

Powiązane kategorie