Instrukcja Hoover SY51 SY04 011 Odkurzacz

Instrukcja

3

*Certain Models Only ** Certain models only, nozzles may vary according to model

Emptying the Dust Container (Fig. 10)

1. Slide the bin release button downward and remove the dust bin from the cleaner.

2. Hold the container using the bin handle and pull the bin emptying latch. The dust

container door will automatically open.

3. Once empty, gently tap or shake the container to release any excess dust.

IMPORTANT -

Do not fill above the max level mark shown on the bin.

Allergy and asthma suerers:

When emptying any vacuum cleaner it is dicult to avoid exposure to dust. To minimize this

risk, please follow these instructions:

1. Wrap the lower bin in a plastic bag and close the bag tightly around the dust container

before emptying.

2. Pull the bin emptying latch to empty the dust into the plastic bag. Close the bag quickly

and dispose of it immediately. (Fig. 11)

CLEANER MAINTENANCE

- Deep Carpet Cleaning: Press the pedal on the nozzle on Carpet mode and adjust the

slider on the nozzle on DEEP CARPET CLEANING. In this position brushes, wheels

and wiper blade are raised for a deeper cleaning of your carpet. [2ec]

WARNING: It is recommended to avoid potential scratching of wooden oors that

the pedal is not set on hard oor mode and the slider on deep carpet cleaning

Using the flexi tube:

Remove the flexi tube from the handle location in the cleaner. (Fig. 6)

You are immediately ready to use it alone or combined with the accessories, as desired:

• 3 in1 tool (stored on board)

• Extension tube*

• Mini-turbo nozzle*

• Long crevice tool

• Multi-function tool*

The exi tube gives you the maximum exibility of usage. (Fig. 7

)

IMPORTANT

- When using cleaning tools, the cleaner must be kept in the upright position, and

held.

Using your 3 in1 tool:

The 3 in1 tool (Fig.8) is composed of:

• Crevice tool to clean corners and hard to reach areas

• Furniture nozzle to clean curtains and soft furnishings

• Dusting brush attachment (with bristles) to clean delicate surfaces

The 3 in1 tool can be used directly on the flexi tube or combined with the additional exten

sion tube.

Assembly the dust bin

(Fig. 9

):

• Dust bin to be put in the location

• To rotate the dust bin and lock into main body

Cleaning the washable lters Fig. 12

1. Slide the bin release button downward and remove the dust bin from the cleaner.

2. Remove the lter pack by releasing the tab at the rear.

3. Separate the GREY foam lter from the DARK GREY EPA lter pack using the tab provided.

Gently tap both lters against the side of a bin to release excess dust.

4. Wash the GREY foam lter thoroughly under hand warm water until the water runs clean.

Remove excess water by shaking and leave to dry for 24 hours. DO NOT USE HOT WATER

OR DETERGENTS.

5. Wash the DARK GREY EPA lter thoroughly from the inside under hand warm water until

the water runs clean. Remove excess water by shaking and leave to dry for 24 hours.

When completely dry reassemble and ret lters to cleaner. DO NOT USE HOT WATER OR

DETERGENTS.

IMPORTANT - For optimum performance, shake o excess dust from the lters regularly.

We recommend that the GREY foam lter and the DARK GREY EPA lter are washed every 3

MONTHS.

NOTE: Do not use the cleaner without lters assembled.

Cleaning the dust bin / separation unit

1. Place the bin on a at surface and remove the lters.

2. Remove the Airvolution system by lifting the Airvolution unit handle. (Fig. 13)

3. Use a cloth or the dusting brush to remove excessive dust from the Airvolution unit

surface.

4. Ret the Airvolution unit into the dust bin and ret the lters.

5. Ret the dust bin to the cleaner.

NOTE: For stubborn dirt the Airvolution system can be washed, but care must be taken that it

is completely dry before retting to the cleaner.

IMPORTANT -

For optimum performance, we recommend that Airvolution system is inspected

after each empty.

Removing a blockage

1. check if the dust container is full. If so refer to “emptying the dust container’’.

2. If the dust container is empty but suction is still low:

A. If cleaning tools were in use check the cleaning tool. (The mini-turbo* nozzle can be

checked by unlocking the clip and lifting the cover to remove any blockage) (Fig. 3b)

B. check the exi tube by removing it from the hose handle location, stretching it to full

length.

C. Check the bin inlet by removing the bin and checking inside the bin inlet.

D. Remove the nozzle and check the nozzle connection.

E. Remove the blockage inspection hose and check from both sides. (Fig. 14)

IMPORTANT  Switch the cleaner o and remove the plug from the electricity supply before

checking cleaner.

GB

ACCESSORIES AND NOZZLES

To obtain the best performance and energy eciency

#1

it is recommended that the correct

nozzles are used for the main cleaning operations. These nozzles are indicated in the diagrams

by the letters GP, HF or CA.

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Hoover SY51 SY04 011 Odkurzacz. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Hoover. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Hoover SY51 SY04 011 Odkurzacz w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Hoover Odkurzacze
Więcej podręczników Odkurzacze

Często zadawane pytania dotyczące Hoover SY51 SY04 011 Odkurzacz

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

Hoover TXL10HM 011 Odkurzacz

Instrukcja

Hoover TE70_TE03011 Odkurzacz

Instrukcja

Hoover HF122EN 011 Odkurzacz

Instrukcja

Hoover HF920P 011 Odkurzacz

Instrukcja

Hoover TE75PET 011 Odkurzacz

Instrukcja

Hoover HF222AXL 011 Odkurzacz

Instrukcja

Hoover HF522SFP 011 Odkurzacz

Instrukcja

Hoover HF920P 001 Odkurzacz

Powiązane kategorie