Instrukcja Hikoki CR 18DSL Piła szablasta

Instrukcja

3

English

Slippery handles and grasping surfaces do not

allow for safe handling and control of the tool in

unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specifi ed by the

manufacturer.

A charger that is suitable for one type of battery pack

may create a risk of fi re when used with another

battery pack.

b) Use power tools only with specifi cally

designated battery packs.

Use of any other battery packs may create a risk of

injury and fi re.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another.

Shorting the battery terminals together may cause

burns or a fi re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, fl ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

e) Do not use a battery pack or tool that is damaged

or modifi ed.

Damaged or modifi ed batteries may exhibit

unpredictable behaviour resulting in fi re, explosion

or risk of injury.

f) Do not expose a battery pack or tool to fi re or

excessive temperature.

Exposure to fi re or temperature above 130 °C may

cause explosion.

g) Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specifi ed in the instructions.

Charging improperly or at temperatures outside

the specifi ed range may damage the battery and

increase the risk of fi re.

6) Service

a) Have your power tool serviced by a qualifi ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

b) Never service damaged battery packs.

Service of battery packs should only be performed

by the manufacturer or authorized service providers.

PRECAUTION

Keep children and infi rm persons away.

When not in use, tools should be stored out of reach of

children and infi rm persons.

CORDLESS RECIPROCATING SAW

SAFETY WARNINGS

1. Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring.

Cutting accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and could

give the operator an electric shock.

2. Use clamps or another practical way to secure and

support the workpiece to a stable platform.

Holding the workpiece by hand or against your body

leaves it unstable and may lead to loss of control.

ADDITIONAL SAFETY WARNINGS

1. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

2. Never disassemble the rechargeable battery and

charger.

3. Never short-circuit the rechargeable battery.

Shortcircuiting the battery will cause a great electric

current and overheat. It results in burn or damage to the

battery.

4. Do not dispose of the battery in fi re. If the battery is burnt,

it may explode.

5. Bring the battery to the shop from which it was purchased

as soon as the post-charging battery life becomes too

short for practical use. Do not dispose of the exhausted

battery.

6. Do not insert object into the air ventilation slots of the

charger. Inserting metal objects or infl ammables into the

charger air ventilation slots will result in electrical shock

hazard or damaged charger.

7. When using this unit continuously, the unit may overheat,

leading to damage in the motor and switch. Please leave

it without using it for approximately 15 minutes.

8. Wear earplugs to protect your ears during operation.

9. Do not touch the blade during or immediately after

operation. The blade becomes very hot during operation

and could cause serious burns.

10. Always hold the body handle and front cover of the power

tool fi rmly as shown in Fig. 9 and Fig. 10. Otherwise the

counterforce produced may result in inaccurate and

even dangerous operation.

11. Remove the battery from tool or place the switch in the

locked or off position before making any adjustments,

changing accessories, or storing the tools.

12. Mounting and dismounting the blade

○ Be absolutely sure to keep the switch turned off and the

battery removed to prevent any accident.

○ Pull the back of the saw blade two or three times by hand

and check that the blade is securely mounted. When

pulling the blade, you will know it is properly mounted if it

clicks and the lever moves slightly. (Fig. 3)

○ When pulling the saw blade, be absolutely sure to pull it

from the back. Pulling other parts of the blade will result

in an injury.

○ If the broken saw blade is hidden inside the small slit,

hook the broken blade using a tip of another saw blade

and take it out. (Fig. 4)

○ After use, blow away sawdust, earth, sand, moisture,

etc., with air or brush them away with a brush, etc., to

ensure that the blade mount can function smoothly.

○ As shown in Fig. 5, carry out lubrication around the

blade holder on a periodic basis by use of cutting fl uid,

etc.

○ Continued use of the tool without cleaning and lubricating

the area where the saw blade is installed can result in

some slack movement of the lever due to accumulated

sawdust and chips. Under the circumstances, pull a

rubber cap provided on the lever in the direction of an

arrow mark as shown in Fig. 5 and remove the rubber

cap from the lever. Then, clean up the inside of the

blade holder with air and the like and carry out suffi cient

lubrication.

The rubber cap can be fi tted on if it is pressed fi rmly onto

the lever. At this time, make certain that there exists no

clearance between the blade holder and the rubber cap,

and furthermore ensure that the saw-blade-installed

area can function smoothly.

○ Do not use any saw blade with a worn-out blade hole.

Otherwise, the saw blade can come off , resulting in

personal injury.

0000Book̲CR18DSL.indb30000Book̲CR18DSL.indb3 2019/07/2519:25:522019/07/2519:25:52

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Hikoki CR 18DSL Piła szablasta. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Hikoki. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Hikoki CR 18DSL Piła szablasta w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Hikoki Piły szablaste
Więcej podręczników Piły szablaste

Często zadawane pytania dotyczące Hikoki CR 18DSL Piła szablasta

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

Hikoki CR 13VBY Piła szablasta

Instrukcja

Hikoki CR 13VEY Piła szablasta

Instrukcja

Parkside IAN 43001 Piła szablasta

Instrukcja

FERM RSM1010 Piła szablasta

Instrukcja

Stayer SS 210 Piła szablasta

Instrukcja

Parkside IAN 340502 Piła szablasta

Instrukcja

Ryobi RRS18-0 Piła szablasta

Instrukcja

Einhell TE-AP 18/26 Li Piła szablasta

Powiązane kategorie