Instrukcja EGO HT2600E Nożyce do żywopłotu

Instrukcja

56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER— HT2600E6

EN

To Stop

Move the hedge trimmer away from the cutting area and

release either of the trigger to stop the hedge trimmer.

WARNING: Always remove the battery pack from

the hedge trimmer during work breaks and after finishing

work.

USING THE HEDGE TRIMMER

DANGER: If the blade jams on any electrical cord

or line, DO NOT TOUCH THE BLADE! IT CAN BECOME

ELECTRICALLY LIVE AND VERY DANGEROUS. Continue

to hold the hedge trimmer by the insulated rear handle

or lay it down and away from you in a safe manner.

Disconnect the electrical service to the damaged line or

cord before attempting to free the blade from the line or

cord. Failure to heed this warning will result in serious

personal injury or possible death.

WARNING: Avoid trimming too much at one time or

through the heavy shrubbery. This can cause the blades to

bind and slow, reducing the cutting efficiency.

NOTICE: The trimmer shall be used to cut stems less

than (30.5mm) thick.

NOTICE: For new growth, a wide sweeping is suitable

for the stems fed directly into the cutting blade. For older

growth, a sawing movement is good for trimming the

thicker stems. A non-powered hand saw or pruning saw is

suggested for trimming the large stems first.

Top Cutting

Use a wide sweeping motion. A slight downward tilt of the

cutting blades in the direction of motion gives the best

cutting results. For better cutting effect, you might as well

use the string to guide the hedge level as Fig. E shown.

Side Cutting

When trimming the sides of the hedge, begin at the

bottom and cut upwards as Fig. F shown. Trim the side of

a hedge so that it will be slightly narrower at the top. This

shape will expose more of the hedge to sunlight, resulting

in a more uniform growth.

MAINTENANCE

WARNING: When servicing, use only identical

replacement parts. Use of any other parts may create a

hazard or cause product damage. To ensure safety and

reliability, all repairs should be performed by a qualified

service technician.

APPLICATION

You may use this product for trimming the hedges,

shrubs and bushes with a branch diameter of less than

ø30.5mm.

NOTICE: The tool is to be used only for its prescribed

purpose. Any other use is deemed to be a case of misuse.

INSTALLING/REMOVING THE BATTERY PACK

Use only with battery packs and chargers listed

in fig.A2.

Charge before first use.

To Install (Fig. B)

Align the battery ribs with the mounting slots and press

the battery pack down until you hear a “click”.

To Remove (Fig. C)

Depress the battery-release button and pull the battery

pack out.

WARNING: Always be aware for the location of your

feet, children, or pets when pressing the battery-release

button. Serious injury could result if the battery pack falls.

NEVER remove the battery pack at a high location.

HOLDING THE HEDGE TRIMMER (Fig. D1-D5)

The unit has both a front and rear handle. With the blade

directed away from you, hold the unit by both handles.

The rear handle can be set in five positions

(0°/±45°/±90°) by raising up the handle-release lever

(Fig. D1 to Fig.D5), giving you many choices for a

comfortable grip when performing cutting operations.

WARNING: Do not adjust the handle while the tool is

running. Stop the tool and remove the battery first.

STARTING/STOPPING THE HEDGE TRIMMER

Before operating, remove the blade guard and hold the

trimmer with both hands, one hand on the rear handle

and the other on the front handle. Then check for stable

footing, upright standing and a proper cutting distance.

To Start

1. Install the battery pack.

2. Squeeze and hold the front trigger with one hand.

3. Press and hold the lock-off button with the thumb of

your other hand, then squeeze the rear trigger with

your fingers to start the hedge trimmer. Release the

lock-off button but continue to squeeze the trigger for

continued operation.

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi EGO HT2600E Nożyce do żywopłotu. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z EGO. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego EGO HT2600E Nożyce do żywopłotu w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla EGO Nożyce do żywopłotu
Więcej podręczników Nożyce do żywopłotu

Często zadawane pytania dotyczące EGO HT2600E Nożyce do żywopłotu

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

EGO HTA2000S Nożyce do żywopłotu

Instrukcja

EGO HT2411E Nożyce do żywopłotu

Instrukcja

EGO HT2000E Nożyce do żywopłotu

Instrukcja

EGO HTX5300-P Nożyce do żywopłotu

Instrukcja

EGO HTX6500 Nożyce do żywopłotu

Instrukcja

EGO HT2400E Nożyce do żywopłotu

Instrukcja

EGO HT2410E Nożyce do żywopłotu

Instrukcja

EGO MHCC1002E Nożyce do żywopłotu

Powiązane kategorie