Instrukcja Bionaire BFH251 Ogrzewacz

Instrukcja

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance by

a person responsible for their safety. Children

should be supervised to ensure that they do

not play with the appliance.

BATHROOM USE

UK ONLY:

• Regulations prevent the use of this heater in

the bathroom.

IN OTHER COUNTRIES

• If this heater is going to be used in a

bathroom, or similar room, it must be installed:

a. In such a way that the switches and other

controls cannot be touched by the person

in the bath or shower.

b. Outside the grey shaded areas (Fig 3 and 4).

• If you are unsure about the installation of this

heater in the bathroom we recommend that

you seek advice from a professional

electrician/installer.

Safety in use

• Extra caution is necessary when the heater is

used near children or when it is left unattended.

• DO NOT insert any objects into the heater.

• Keep the mains cord at a safe distance from

the main body of the heater.

• Prevent overheating of the heater by keeping

the air inlet and outlet unblocked. DO NOT

hang anything in front of or above the heater.

• If overheating should occur, the built-in

overheating safety device will switch off the

heater.

• DO NOT use aerosols, inflammable substances

or materials sensitive to heat in the flow of hot air.

• Do not place the cord under a rug.

Servicing

• Should the heater stop working, first check the

fuse in the plug (UK only) or fuse / circuit breaker

at the distribution board is operating, before

contacting the manufacturer or service agent.

• If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or a similarly qualified person in order

to avoid hazard.

• The heater contains no user serviceable parts

and should the product suffer damage or breakdown

it must be returned to the manufacturer or

their service agent.

CLEANING AND MAINTENANCE

• Turn off the unit.

• Remove the plug from the wall socket.

• Wait for the heater to cool down sufficiently.

• You may clean the outside of the heater with a

damp cloth. DO NOT allow water to come into

the appliance. DO NOT use soap or

chemicals, which may damage the housing.

Allow sufficient time to dry before plugging the

unit back in the socket.

• Clean the air inlet and outlet openings

regularly (with normal use at least twice a

year) with a vacuum cleaner.

For U.K. and Ireland only:

If the plug is not suitable for the socket outlets in

your home, it can be removed and replaced by a

plug of the correct type. Please refer to

"Installation of a plug" below.

Installation of a plug applicable to U.K.

and Ireland only

NOTE: If the terminals in the plug are not

marked or if you are unsure or in doubt about

the installation of the plug please contact a

qualified electrician. If a 13A 3-pin plug is fitted,

it must be an ASTA approved plug, conforming

to BS1363 standard. Replacement 13A fuses

must be BSI or ASTA BS1362 approved.

This product is fitted with a 13A plug complying to

BS1363. If this plug is unsuitable or needs to be

replaced, please note the following: The wires in

the mains lead are coloured as such:

BROWN - LIVE

BLUE - NEUTRAL

Please note that the colour of these mains wires

may not correspond with the colour markings that

identify the terminals in your plug. Please proceed

as follows:

The BROWN coloured wire must be connected to

the terminal, which is marked with the letter "L" or

is coloured RED.

The BLUE coloured wire must be connected to

the terminal, which is marked with the letter "N" or

is coloured BLACK.

DO NOT CONNECT either of these wires to the

earth terminal in the plug. The earth terminal plug

is marked with the letter "E", or with the earth

symbol , or coloured GREEN, or GREEN and

YELLOW.

3

READ AND RETAIN THE FOLLOWING

FOR FUTURE REFERENCE.

GENERAL DESCRIPTION (Fig.1)

A.POWER LIGHT

B.MODE CONTROL

C.THERMOSTAT

D. CARRY HANDLE (not visible)

E.BASE

OPERATING INSTRUCTIONS (Fig.2)

1. For heater operation, please set the

Thermostat (C) all the way to the maximum

temperature, then see section SETTING THE

THERMOSTAT for further instructions.

2. Turn the Mode Control (B) to desired heat setting:

I - Low setting

II - High setting

3. For fan-only operation, without any heat

output, turn the Mode Control to the FAN ( )

setting. NOTE: The Thermostat (C) must be

turned to the maximum setting to being

operating the fan setting.

4. The Power Light (A) will remain lit during

operation.

SETTING THE THERMOSTAT (Fig.2)

1. You need to set Thermostat (C) on the

maximum temperature and the Mode Control

(B) to a heat setting to start the heater. Allow

heater to operate and warm up the room.

2. When the desired temperature / comfort level

is reached, lower the thermostat setting until

the fan/heater stops operating.

3. The control will now automatically maintain

the pre-set temperature level by turning the

heater ON and OFF.

NOTE: It is normal for the heater to cycle ON

and OFF as it maintains the preset temperature.

To prevent the unit from cycling, you need to

raise the thermostat setting.

AUTO SAFETY SHUT OFF

The heater has a built in safety device which will

switch off the heater automatically in case of

accidental overheating. It can only resume

operation when the user has reset the unit.

To reset the heater (Fig.2)

1. Turn the Mode Control to the OFF ( O ) position.

2. Unplug the heater and wait for 30 minutes for

the unit to cool down.

3. After the 30 minutes, plug the unit in again

and operate normally.

Safety Back-Up Fuse

In the unlikely case the heater does not respond

to an overheat situation, the safety back-up fuse

will engage. In this case, the heater will not

reset. Please contact your local service number

for advice.

IMPORTANT SAFEGUARDS

Mains connection

• Read these instructions carefully, in conjunction

with the illustrations, before using the heater.

• Before connecting the heater, check that the

voltage indicated on the rating plate corresponds

to the mains voltage in your home / office.

• Avoid the use of an extension cord because it

may cause the heater to overheat.

• WARNING: Risk of Fire. Discontinue use if

the outlet or plug become hot to the touch.

Overheating may indicate a worn or damaged

outlet. Consult a qualified electrician for outlet

replacement.

Safe positioning

• Only touch the heater with dry hands.

• DO NOT position where it can be touched by

children, especially the very young.

• When using the heater, DO NOT place in the

immediate surroundings of a shower or

swimming pool.

• DO NOT use this heater outdoors.

• DO NOT position the heater directly under a

power socket.

• Position the heater in such a manner that the

air flow toward the heater and away from it, is

not obstructed.

• WARNING: In order to avoid overheating, do

not cover the heater ( ).

• Allow a safe area around the heater. DO NOT

block the air inlet or outlet. Keep objects at

least 50 cm from the top and sides and 200

cm at the front.

• Do not use this heater when it is lying on its side.

• If the heater is tipped over, unplug it and allow

it to cool before standing it back up.

• DO NOT use the heater in rooms with

explosive gas (e.g. petrol) or while using

inflammable glue or solvent (e.g. when gluing

or varnishing parquet floors, PVC etc.)

CAUTION: In order to avoid a hazard due to

inadvertent resetting of the thermal cutout, this

appliance must not be supplied through an

external switching device, such as a timer, or

connected to a circuit that is regularly switched

on and off by the utility.

• This appliance is not intended for use by

persons (including children) with reduced

ENGLISH

2

A

B

C

D

E

Fig.1

Fig.3

Fig.4

o

Fig.2

NOTE: Not suitable for bathroom use in the UK.

B

C

13 A Fuse

BFH251-I_09MLM1.qxd:BFH251I08MLM1.qxd 6/5/09 7:38 PM Page 4

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Bionaire BFH251 Ogrzewacz. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Bionaire. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Bionaire BFH251 Ogrzewacz w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Bionaire Ogrzewacze
Więcej podręczników Ogrzewacze

Często zadawane pytania dotyczące Bionaire BFH251 Ogrzewacz

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.