Instrukcja Auriol IAN 61430 Stacja pogodowa

Instrukcja

   

-

1

-











Radio controlled weather

station

Preliminary note

Please read the instruction manual before using

the product for the first time- even if you are

experienced at using electronic equipment.

Please take special care when reading the

chapter "Important safety information". Keep this

instruction manual so you may use it a reference

material in the future. If you sell or give this

product to someone else it is very important to

also include this manual.

Important safety information

Set up the device safely

Place the device on a solid even surface.

It is not designed for operation in rooms with high

humidity (i.e. bathroom). Make sure that:

• sufficient ventilation is always guaranteed

(don’t place the device on shelves or where

curtains or furniture block the ventilation holes,

and ensure that there are at least 10 cm of

space on all sides);

• the device isn’t placed on a thick carpet or bed

during operation ;

• no direct heat sources (i.e. radiators) influence

the device;

• no direct sunlight reaches the device;

• contact with splashing or dripping water must

be avoided (don’t place any items filled with

liquids, i.e. vases, onto or next to the device);

• the device doesn’t stand near magnetic fields

(i.e. speakers);

• candles and other open flames must be kept

away from this product at all times to prevent

the spread of fire

• no foreign objects penetrate the housing.

- Batteries

Insert the batteries/ rechargeable batteries in the

correct polarity. Don’t try to recharge non-

rechargeable batteries and under no

circumstances throw them into fire. Danger of

explosion.

Do not use unequal batteries (old and new,

Alkaline and carbon, etc.) simultaneously. If you

will not use the device for a long time, remove the

batteries and store the device in a dry and dust-

free place. Improper use of batteries may cause

an explosion or leakage. If the batteries have

leaked, use gloves and clean the appliance

thoroughly with a dry cloth.

- Electrical devices should not be in the hands

of children

Never let children use electrical devices

unsupervised. Children can’t always recognize the

possible dangers properly. Batteries/

rechargeable batteries can be life threatening

when swallowed. Store the batteries where they

cannot be reached by small children. If a battery

is swallowed, medical aid must be sought

immediately.

Also keep the packaging foils away from children.

Danger of suffocation.

Intended use

This electronic appliance is intended for time

display and the described additional features. Any

other use or modification of the electronic

appliance does not comply with the intended

uses. The manufacturer is not liable for damages

caused by improper use or misuse. The device is

not intended for commercial use.

Cleaning instructions

Clean the product with a soft, dry and lint-free

cloth. A glasses cleaning cloth is ideal.

Scope of delivery

Please note: Check the scope of delivery after

purchase. Please ensure that all parts are

included and undamaged.

1. Weather station

2. Sensor

3. Stand

4. 5x batteries 1.5V AA

Speed setting

When setting numerical values, press and hold

"+" or "-" to use the speed setting.

   

-

2

-

Display description

A weather forecast (weather frog),

graphical air pressure of the last

12 hours, air pressure trend, numerical

air pressure

B Sunrise and sunset times, tide display

(spring and neap tides), location

display, moon phase display

C Display of the current outdoor sensor

(1,2 or 3), outdoor temperature,

temperature and frost alert, temperature

trend, outdoor humidity, humidity trend,

battery low indicator for outdoor sensor

D Indoor temperature, temperature trend,

indoor humidity, humidity trend, battery

low indicator for weather station

E Date and day of the week

F Time and reception indicator, snooze

symbol, 2 alarm symbols, daylight

saving time indicator

Setup

Open the battery compartment at the back of the

weather station. Insert the batteries in the correct

polarity and close the battery compartment.

Remove the protective film from the weather

station display.

Position the station and the sensor directly next to

one another. Insert the batteries into the sensor

within the next 2 minutes.

The weather station now starts to receive the time

signal and the radio tower flashes in the display

next to the time. While receiving the signal, none

of the weather station's other functions can be

used. If signal reception is successful the weather

station's time and date are set automatically.

If the reception is not successful after 7 minutes

please move the weather station to a different

location at your site. Restart the reception by

pressing "+" and "-" together briefly. The weather

station will restart the reception attempt.

If the reception is not possible at all please set the

time manually.

While the weather station tries to receive the time

signal, it simultaneously searches for the signal

from the outside sensor and the red light on the

front of the sensor flashes.

If the transmission signal is received successfully

the current outside temperature appears on the

display of the weather station. Signal reception

and exact synchronisation with the sensor can

take up to 2 hours.

Replace the batteries if the battery icon appears

on the display.

Inside Hygrometer

Your weather station measures the humidity in the

range of 25-95% relative humidity.

Outside Hygrometer

Your weather station measures the humidity in the

range of 25-95% relative humidity from the

outside sensor.

Manual time setting, 12/24 hour

display, day of the week language,

time zone, °C/°F selection

Press and hold MODE. The 12/24 hours indicator

will blink on the display.

Press "+" or "-" to select the time format and

confirm your setting by pressing MODE.

The °C or °F indicator will now blink on the

display. Press "+" or "-" to select the temperature

unit and confirm your setting by pressing MODE.

The time zone adjustment will now blink on the

display. The time zone adjustment can be set

when using the weather station in a different time

zone.

Set the time zone difference to your home time

zone by pressing "+" or "-". An adjustment of -2 to

+2 hours is possible. Confirm your setting by

pressing MODE.

Set the hours, minutes, year, month, day and

language of the day of the week display in the

same way.

The day of the week language abbreviations are

as follows: EN=English, GE=German,

SP=Spanish, FR=French, IT=italian.

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Auriol IAN 61430 Stacja pogodowa. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Auriol. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Auriol IAN 61430 Stacja pogodowa w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Auriol Stacje pogodowe
Więcej podręczników Stacje pogodowe

Często zadawane pytania dotyczące Auriol IAN 61430 Stacja pogodowa

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

Auriol IAN 300120 Stacja pogodowa

Instrukcja

Auriol IAN 85919 Stacja pogodowa

Instrukcja

Auriol IAN 273695 Stacja pogodowa

Instrukcja

Auriol IAN 270628 Stacja pogodowa

Instrukcja

Auriol IAN 60107 Stacja pogodowa

Instrukcja

Auriol IAN 341189 Stacja pogodowa

Instrukcja

Auriol IAN 354197 Stacja pogodowa

Instrukcja

Auriol IAN 69251 Stacja pogodowa

Powiązane kategorie