Instrukcja Ryobi RY18HTX60A Nożyce do żywopłotu

Instrukcja

■ Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a hazardous

situation.

■ Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL CARE AND USE

■ Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

■ Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

■ When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

■ Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

■ Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or

risk of injury.

■ Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or temperature

above 130°C may cause explosion.

■ Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk of

fire.

SERVICE

■ Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

■ Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorised service providers.

CORDLESS HEDGE TRIMMER SAFETY

WARNINGS

■ Keep all parts of the body away from the blade. Do

not remove cut material or hold material to be cut

when blades are moving. Blades continue to move

after the switch is turned off. A moment of inattention

while operating the hedge trimmer may result in serious

personal injury.

■ Carry the hedge trimmer by the handle with the

blade stopped and taking care not to operate any

power switch. Proper carrying of the hedge trimmer will

decrease the risk of inadvertent starting and resultant

personal injury from the blades.

■ When transporting or storing the hedge trimmer,

always fit the blade cover. Proper handling of the

hedge trimmer will decrease the risk of personal injury

from the blades.

■ When clearing jammed material or servicing the unit,

make sure all power switches are off and the battery

pack is removed or disconnected. Unexpected

actuation of the hedge trimmer while clearing jammed

material or servicing may result in serious personal

injury.

■ Hold the hedge trimmer by insulated gripping

surfaces only, because the blade may contact

hidden wiring. Blades contacting a “live” wire may

make exposed metal parts of the hedge trimmer “live”

and could give the operator an electric shock.

■ Keep all power cords and cables away from cutting

area. Power cords or cables may be hidden in hedges or

bushes and can be accidentally cut by the blade.

■ Do not use the hedge trimmer in bad weather

conditions, especially when there is a risk of

lightning. This decreases the risk of being struck by

lightning.

ADDITIONAL SAFETY WARNINGS

■ Do not attempt to cut stems or twigs that are larger

than 26 mm thick for RY18HTX60A or 24 mm thick for

RY18HT55A, or are obviously too large to feed into the

cutting blade. Use a non-powered hand saw or pruning

saw to trim large stems.

■ While operating the product, always hold it firmly with

both hands by the two handles.

■ The product must be used only at ground level and not

on any other unstable support.

■ Inspect the product before each use. Check for loose

fasteners, etc. Make sure that all guards and handles are

properly and securely attached. Replace any damaged

parts before use. Check for battery pack leaks.

■ Do not operate the product in poor lighting. The operator

requires a clear view of the work area to identify potential

hazards.

■ Check the hedges and bushes for foreign objects, such

as wire fences and hidden wiring.

■ The use of hearing protection reduces the ability to hear

warnings (shouts or alarms). The operator must pay

extra attention to what is going on in the working area.

■ Turn off the product, remove the battery pack, and allow

both to cool down. Make sure that all moving parts have

come to a complete stop:

● before adjusting the working position of the cutting

means

● before servicing

● before clearing a blockage

● before checking, cleaning, or working on the product.

● before changing accessories

● before leaving the product unattended

● before checking for damage after striking a foreign

object

● before performing maintenance

● whenever the product starts to vibrate abnormally

■ Do not force the product through heavy shrubbery. This

can cause the blades to bind and slow down. If the

blades slow down, reduce the pace.

4

Original Instructions

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Ryobi RY18HTX60A Nożyce do żywopłotu. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Ryobi. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Ryobi RY18HTX60A Nożyce do żywopłotu w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Ryobi Nożyce do żywopłotu
Więcej podręczników Nożyce do żywopłotu

Często zadawane pytania dotyczące Ryobi RY18HTX60A Nożyce do żywopłotu

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

Ryobi RHT1850H25HS Nożyce do żywopłotu

Instrukcja

Ryobi RHT5555RSH Nożyce do żywopłotu

Instrukcja

Ryobi RY36PHT50A Nożyce do żywopłotu

Instrukcja

Ryobi RHT7065RL Nożyce do żywopłotu

Instrukcja

Ryobi CHT1850LC Nożyce do żywopłotu

Instrukcja

Ryobi CHT1850LC Nożyce do żywopłotu

Instrukcja

Ryobi CHT1850P Nożyce do żywopłotu

Instrukcja

Ryobi OHT1851R Nożyce do żywopłotu

Powiązane kategorie