Instrukcja Rexel Mercury RDSM750 Niszczarka

Instrukcja

6

Reverse Function

1 Should you wish to reverse the shredding direction whilst

shredding a document, a reverse button (f) has been fitted

for your convenience.

2 By pressing the reverse button the shredding cutters will

change direction allowing the retrieval of the document

being shredded. The anti-jam indicator will turn to red.

3 The reverse function will only run whilst the button is being

pressed. When the reverse button has been released the

shredder will revert to stand by mode.

4 To turn back to auto mode, press the auto button (e).

CD and Credit Card Shredding

Models RSM1130, RDM1150, RDM1170, RDSM750 and

RDSM770 can not shred CD’s or credit cards, therefore this

section is not applicable to these three models. All other

Mercury models can shred CD’s and credit cards as follows:

1 A separate CD tray is provided to collect the shredded CD

shards. Ensure that this is correctly mounted onto the bin

rail or internal bin (small office models) before shredding

CDs or credit cards. CD and credit card shards should be

disposed of separately to paper.

2 Pull up the CD guide (h) located in the centre of the feed

area and flip it into position over the shredder mouth.

3 For credit card shredding, switch the shredder to auto mode

and insert the card in line with the arrow marked on the

shredder mouth. Only shred 1 credit card at a time.

4 For CD shredding, extend the sides of the CD guide, switch

the shredder to auto mode and place the CD into the centre

of the CD slot. Only shred 1 CD at a time.

5 Empty the CD tray after 8 credit cards or CD’s to avoid

waste spilling over into the paper waste bin. Remove the CD

tray before recommencing to shred paper.

Operation

1 After unpacking the product, pull out the shredder bin or

bag frame (depending on model) and remove the CD shard

tray, which sits on top of the bag frame on departmental

models or bin on small office models. Store this tray on the

external location points (i) and use when you shred CD’s or

credit cards to separate waste for recycling (not applicable

for RSM1130, RDM1150, RDM1170, RDSM750 and

RDSM770 models).

2 Connect shredder to mains supply.

3 Ensure the on/off button on the back of the machine is in

the on position (d).

4 To commence shredding, press the central Auto button (e).

This will illuminate the anti jam indicator.

This sets the shredder into auto mode and initiates the

Mercury anti jam mechanism. The standby symbol will

illuminate blue and the anti-jam indicator will glow green.

You are now able to shred.

5 Insert paper to be shredded into the feed area. The Mercury

anti jam mechanism will sense the thickness of the paper

being shredded.

If the paper thickness is within the shredder’s capacity,

the motor will start and your documents will be shredded.

Cutters will stop once the shredding process is complete.

If the paper thickness is greater than the shredder’s sheet

capacity, the anti-jam indicator will turn from green to red

and the motor will not run.

6 If this happens, remove some of the sheets from the paper

stack and re-try until the anti-jam indicator reverts back to

green, the shredder will then automatically start and allow

the paper to be shredded.

7 If the shredder is left in auto mode for more than 2 minutes

without being used, the shredder will automatically turn

back to standby mode in order to save power.

8 The shredder will automatically ‘wake up’ from sleep mode

when paper is inserted into the shredder mouth. There is no

need to press the Auto button (e).

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Rexel Mercury RDSM750 Niszczarka. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Rexel. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Rexel Mercury RDSM750 Niszczarka w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Rexel Niszczarki
Więcej podręczników Niszczarki

Często zadawane pytania dotyczące Rexel Mercury RDSM750 Niszczarka

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

Rexel Mercury RLM11 Niszczarka

Instrukcja

Rexel Mercury RSS2230 Niszczarka

Instrukcja

Rexel V25 Niszczarka

Instrukcja

Rexel Mercury RLX20 Niszczarka

Instrukcja

Rexel Auto+ 600X Niszczarka

Instrukcja

Rexel Auto+ 175X Niszczarka

Instrukcja

Rexel Auto+ 300X Niszczarka

Instrukcja

Rexel V30WS Niszczarka

Powiązane kategorie