Instrukcja Crivit IAN 78999 Licznik kroków

Instrukcja

GB/IE GB/IE GB/IE GB/IE

GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE

GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE GB/IE PL

Licznik kroków z radiem

Zastosowanie zgodne

z przeznaczeniem

Krokomierz rejestruje liczbę wykonanych kroków,

pokonany dystans, wymagany czas oraz liczbę

spalonych kalorii. Urządzenie nie nadaje się do

rejestracji danych medycznych.

Opis części

Urządzenie:

1

Wyświetlacz LC

2

Przycisk MODE

3

Przycisk „SET“

4

Pokrywa komory na baterię

5

Komora baterii

batteries and / or the device to the provided recy-

cling facilities.

Improper disposal of batteries

can harm the environment!

Never dispose of batteries in your household waste.

They may contain toxic heavy metals and are sub-

ject to hazardous waste regulations. The chemical

symbols of the heavy metals are: Cd = cadmium,

Hg = mercury, Pb = lead. Therefore, dispose of used

batteries through your municipal collection site.

EMC

ber of steps, 10,000 steps, appear on the

LC display.

Keep the SET button pressed in order to switch

to the SET mode.

Press the SET button in order to select the

respective next number position.

After you have set the desired number of steps

with the MODE button, press the SET button

once again in order to confi rm the entered

number of steps.

KCAL Mode:

The calories used and fat burnt (in g) on the current

day are displayed accourding to the defaults.

Press the SET button repeatedly to browse

through Average Speed/ Maximum Speed in

KCAL mode.

Trip time

The activity time of the pedometer for the current

day is displayed.

Trip distance

The distance covered on the current day (in km), as

well as the current time are displayed.

Current Speed

The current speed (in km / h) can be displayed.

Training target “TARGET”

You may enter the number of steps (between 100

and 99999 steps) that you would like to complete

in the course of a day. Your progress is displayed

on the progress bar

12

on the LC-display

1

. After

you have reached your target, the progress bar blinks

until you re-set the training goal.

In the STEP mode, press the SET button until

the TARGET symbol

14

and the default num-

Scope of delivery

1 Pedometer

1 Battery CR1620 (3 V

, Lithium)

1 Set of operating instructions

Safety

WARNING! Please read all the safety infor-

mation and instructions. Failure to observe the

safety information and instructions can result in

electric shock, fi re and / or serious injury.

PLEASE KEEP ALL SAFETY INSTRUCTIONS

AND INSTRUCTIONS FOR USE FOR FUTURE

REFERENCE!

quired to operate the LCD is very low and compa-

rable to that of a wristwatch.

Technical Data

Measuring method: sensor

Step display: 0–99999 steps

Distance display: 0–9999 km

Calorie display: 0–99999 kcal

Pre-setting step length: 150 cm / 59 inch

Adjustable user weight: 30–219 kg (can be

set to 1 kg accuracy)

Default: 50 kg

Body height: 100–249 cm

Default: 150 cm

Time unit: 12 / 24 hr

Battery: 1 battery CR1620

(3 V

, Lithium)

Permissable temperature range: 0–50 °C

Disposal

The packaging is made of environmen-

tally friendly materials, which may be

disposed through your local recycling

facilities.

Contact your local waste disposal authority for

more details on how to dispose of the product

when it is no longer required.

To help protect the environment, please

dispose of the product properly, and not

in household waste, when it has reached

the end of its useful life. Please contact

your local authority for information on

collection points and their opening hours.

Defective or used batteries must be recycled in ac-

cordance with Directive 2006 / 66 / EC. Return

Troubleshooting

The device contains electronic components. There-

fore, interference may occur when it is near devices,

which transmit radio signals.

If error messages appear in the display, remove

these devices from the proximity of the product. In

the event of such malfunctions, remove the batteries

briefl y and reinsert them.

Cleaning and Care

Never use liquids or abrasive cleaning agents

as they could damage the device.

Only the exterior of the device should be

cleaned with a soft, dry and lint-free cloth.

Add a cord to hang the pedometer around

your neck. Use the fastening eye on the left of

the pedometer.

Note: Do not hang the pedometer around your

neck when you are jogging or running.

The pedometer now registers the impacts of the

body and records the number of steps covered, the

distance covered, the calories burnt and the time

required. You can read the values in the LC display

1

, as described in chapter „Prior to start-up“. You

can also read the data from the last 7days and

the entire number of steps walked during the last

7 days.

Note: The recorded values are approximate. A

varying step length and external factors such as

clothing, terrain etc. can hinder exact measurement.

Ensure correct polarity. This is indicated in the

battery compartment.

Start-up

Using the pedometer

Wear the pedometer as described below:

You can securely attach the pedometer to your

trouser belt by means of the belt clip

7

(see fi g.

C, E), put in your trouser pocket, or hang it around

your neck. Read the following instructions to obtain

an accurate measurement:

Put the pedometer in your front trouser pocket

and not in your back pockets.

Ensure that the pedometer lies securely against

your body / clothing in order to obtain an ac-

curate measurement.

To change the weight, proceed as described in

the chapter „Set mode“. The other units (height

and calibration) follow subsequently.

Replacing batteries

Note: When „low battery“

18

appears on the LC-

display, the batteries must be changed. Before you

change the batteries, note the value of the total

completed distance so that you can re-enter it sub-

sequently in the basic settings as described in the

chapter „Odometer Save“.

Note: All stored data will be deleted when you

remove the batteries.

Note: Please ensure the LC-Display is protected

from scratches when replacing batteries.

Proceed with changing the batteries as illus-

trated in Ill. B.

data of trip time / trip distance / current speed

which you want to re-set.

Keep the SET button pressed. The data in trip

time / trip distance / calories used / fat burnt /

completed target step count / average speed /

maximum speed will reset to 0. Personal settings

and calibration are retained.

Note: You may also change the time without los-

ing the stored training data.

In the time mode, keep the SET button pressed

until TIME is displayed on the LC-display.

To change the time, proceed as described in

the chapter „Set mode“.

Note: Weight / height / calibration can be re-set

in the STEP mode.

In the step counting mode, press the SET but-

ton until the weight appears on the LC-display.

savings mode. The LC-display

1

only indicates the

time.

Press any button to end the energy savings mo

de.

Re-set pedometer

After completing the basic settings, there are two

ways of re-setting the pedometer.

Complete re-set

Keep the MODE and SET button

3

simultane-

ously pressed. All stored data will be deleted.

The device then switches back into the set-up

mode.

Re-setting individual settings

Press the MODE button until you are in the STEP

mode. Then press the SET mode to display the

In ODO, hold the SET button and the fi rst digit

will fl ash.

Press the MODE button to select the desired

digit and then press the SET button to confi rm.

Repeat this procedure until desirable distance

is entered.

Activating background

lighting

Press the MODE button

2

for approx. 3 sec-

onds. The backlight illuminates for 3 seconds.

Energy savings mode

If the pedometer is not used for approx. three

minues, it switches automatically to the energy

Previous Day Mode and 7-day storage:

The number of steps, exercise time, distance comple-

ted, calorie counter and fat burnt per day is saved

automatically by the device. The values are re-set

respectively at 0:00 o‘clock.

Press the SET button

3

repeatedly to browse

through the saved data from the last 7 days,

total week record for the last 7 days and the

accumulated total trip distance ODO (km).

Odometer Save

You can save the total trip distance ODO manually

by re-entering the value back to the device.

Before you change the batteries, note the value of

the total completed distance so that you can re-en-

ter it back to the device because ODO data will

be reset to zero in Complete re-set or battery

change.

The pedometer is equipped with the

following modes:

Time Mode

The LC-Display

1

indicates the current time and

the day of the week.

STEP Mode:

The number of the measured steps of the current

day, as well as the time, are displayed.

Note: This device is equipped with 10-step-fi lter to

enhance the step count accuracy. This requires at

least 10 steps for the sensor to gather user’s trip

behavior for speed and distance calculation.

Hence the initial display of the step count will be

above 10.

Press the SET button

3

repeatedly to browse

through Trip time / Trip distance / Current

Speed / Training target in STEP mode.

Press the SET button. Press the MODE button

to enter the length of walk - extended by 100

metres.

Press the SET button. The device is now ready

to calibrate the length of your walking steps.

Press the SET button and begin to walk.

Press the SET button again when you have

completed the previously entered distance. The

calibration is saved.

Press the SET button again. The device is now

ready for use.

Note: The device will only be ready for use when

both Run and Walk calibration are completed.

Selecting the mode

Press the MODE button

2

repeatedly to

browse through the diff erent modes (TIME,

STEP, KCAL and 7-day storage modes).

Press the MODE button to enter the length of

run - extended by 100 metres (100-1000 m).

Confi rm the entry by pressing the SET button.

The device is now ready to calibrate the length

of your steps.

Press the SET button and begin to run.

Press the SET button again when you have

completed the previously entered distance. The

calibration is saved.

Note: The display will show “FAIL” if the step count

to be saved is not feasible with respect to the entered

distance. Re-calibration is required.

Note: You can stop the calibration and re-adjust

the calibration distance by holding the MODE but-

ton during running / walking; or press the MODE

button once in the PRESS START screen.

After the run calibration is saved, you can

either press the SET button or wait for awhile

to enter walk calibration.

Note: Ensure when entering that you take addi-

tional weight into consideration such as clothing or

a backpack.

- Set your height.

- Calibrate the pedometer.

Press the MODE button and select either the

option YES or NO:

Confi rm your setting by pressing the MODE

button.

Note: We strongly recommend calibrating the de-

vice to your personal movement rhythm. Otherwise,

the device uses static data based on the entered

body height and does not perform at its highest

level. You may select YES or NO during calibration.

Note: If you select no during calibration, you will

switch to the step mode. If you select yes, you will

switch to the run calibration mode.

In the calibration start screen, confi rm your

selection by pressing the SET button.

Setting the mode

You must enter your personal data before you use

the pedometer for the fi rst time. You can change

the following values successively:

Press the MODE button

2

repeatedly to

browse through the diff erent modes.

Press the SET button

3

to set the desired value.

- Set the distance unit (km / mile).

Note: Changing the distance unit (km / mile) will

also change the unit for weight (kg / lb) and height

(cm / inch) accordingly.

- Set the time format (12 / 24 hr).

- Set the hour (HR).

- Set the minutes (MIN).

- Set the seconds (SEC).

- Set the day of the week.

- Set your weight.

should remove it immediately in order to prevent

damage to the device!

Avoid contact with the skin, eyes and mucous

membranes. Any part of the body coming into

contact with battery acid should be rinsed off

with a large amount of water and / or a doctor

should be contacted if necessary!

Use only the recommended battery type.

Before Initial Use

Remove the protective fi lm from the LC display

1

before you use the device for the fi rst time.

Then place a battery type CR1620 (3 V ,

lithium) in the battery compartment

5

(see Ill. B).

Note: The device will now perform a brief display

check. All displays will be shown for approx.1sec-

ond. The device then switches into the set-up mode.

Your pedometer is now ready to be confi gured.

CAUTION! EXPLOSION HAZ-

ARD! The batteries may never be

recharged!

When inserting the battery ensure the correct po-

larity! This is indicated in the battery compart

ment.

Clean the battery and device contact before you

insert the battery with a dry cloth if necessary.

Remove the dead battery immediately from the

device. There is an increased risk of leaks!

Batteries may not be disposed of with normal

domestic waste!

Every consumer is legally obliged to dispose

of batteries in the proper manner!

Keep the battery out of reach of children, do not

throw the battery into fi re, do not short-circuit

or take the battery apart.

If you do not observe these instructions, the

battery could be discharged beyond the cut-off

voltage. This will then pose a risk of leaking. If

the battery has leaked inside your device, you

non-compliance with the operating instructions

or interference with the device by unauthorised

individuals.

Never disassemble the device. Improper repairs

may result in considerable danger for the user.

Always have repairs performed by a professional.

Keep the device dry. Never immerse the device

in water or other liquids.

Safety instructions

for batteries

WARNING! RISK OF FATAL INJURIES!

Batteries could be swallowed, which may be

life-threatening. If a battery has been swallowed,

seek medical help immediately.

Remove the battery from the device if it is not

going to be used for a prolonged period.

General Safety

Instructions

Children or persons lacking knowledge or ex-

perience in handling the device or who have

limited physical, sensory or mental abilities,

may not use the device without supervision or

instruction by a person responsible for their

safety. Children must be supervised at all times

to prevent them from playing with the device.

Do not use the device if damaged. Damaged

devices represent a danger of death from elec-

tric shock!

Do expose the device to

– extreme temperatures,

– to direct sunlight,

– humidity / rain.

Otherwise it may be damaged.--

Please note that the guarantee does not cover

damage caused by incorrect handling,

6

Anti-shock ring

7

Belt clip

Display:

8

Week display

9

Calorie display

10

km / m per hour

11

Grams symbol (fat burn)

12

Progress bar

13

Speed

14

TARGET symbol

15

Pedometer on / off

16

Day display

17

PM symbol (afternoon in 12hr format)

18

Display for low battery warning

19

Number of steps

NOTE: The LC display

1

of the device cannot be

switched off . However, the power consumption re-

Pedometer

Intended use

This pedometer records the number of steps you

have taken, the distance covered, the required time

and the calorie consumption. The device is not suit-

able for the recording of medical data.

Parts description

Device:

1

LC display

2

MODE button

3

SET button

4

Battery compartment cover

5

Battery compartment

PEDOMETER

Operation and Safety Notes

LICZNIK KROKÓW Z RADIEM

Wskazówki dotyczące obsługi i bezpieczeństwa

Z31351

A B

C

1

4

2

3

4

5

7

6

E

D

7

19

10

11

8

18

17

16

9

12131415

Ocena

Więcej o tej instrukcji

Rozumiemy, że miło jest mieć papierową instrukcję obsługi Crivit IAN 78999 Licznik kroków. Zawsze możesz pobrać instrukcję z naszej strony internetowej i wydrukować ją samodzielnie. Jeśli chcesz otrzymać oryginalną instrukcję, zalecamy skontaktowanie się z Crivit. Być może będą w stanie dostarczyć oryginalną instrukcję. Szukasz instrukcji swojego Crivit IAN 78999 Licznik kroków w innym języku? Wybierz preferowany język na naszej stronie głównej i wyszukaj numer modelu, aby sprawdzić, czy jest on dostępny.

Dane techniczne

Wszystkie podręczniki dla Crivit Liczniki kroków
Więcej podręczników Liczniki kroków

Często zadawane pytania dotyczące Crivit IAN 78999 Licznik kroków

Nasz zespół wyszukuje przydatne informacje na temat produktu i udziela odpowiedzi na często zadawane pytania. Jeśli znajdziesz nieścisłości lub błędy w naszych odpowiedziach na pytania, poinformuj nas o tym przy pomocy naszego formularza kontaktowego.

Produkty powiązane

Instrukcja

Crivit IAN 499983 Licznik kroków

Instrukcja

Crivit IAN 307012 Licznik kroków

Instrukcja

Crivit IAN 56018 Licznik kroków

Instrukcja

Crivit IAN 326844 Licznik kroków

Instrukcja

Crivit IAN 374629 Licznik kroków

Instrukcja

Crivit IAN 345133 Licznik kroków

Instrukcja

Crivit IAN 54421 Licznik kroków

Instrukcja

Geonaute Dista Newfeel 300 Licznik kroków

Powiązane kategorie